Practical temperature guides, thermometer comparisons and buying advice.
Digital Thermometers

ThermoPro TP18 Review: Fast Thermocouple Instant-Read Thermometer (and Its Successors)

ThermoPro TP18 instant-read thermocouple thermometer reviewed from ThermoPro specs, plus the current TempPro TP18S and TP18SW: 0.5-second reads, ±0.9°F accuracy, 14–572°F.

As an Amazon Associate I earn from qualifying purchases. Product links in this article may earn us a commission at no extra cost to you. Read our affiliate disclosure

Digital and glass thermometers on a red background
Photo via Pexels

Editor’s note: This guide replaces our earlier ThermoPro TP18 review, which is no longer available. It was rewritten in November 2026 from ThermoPro’s own product pages: an archived copy of the original TP18 page and the current TempPro listings for its successors (linked at the end). ThermoPro now sells under the TempPro name, and the original TP18 was already listed as out of stock in 2019. The current versions are the TP18S and TP18SW. We haven’t tested these thermometers ourselves.

Quick answer

  • What it is: a fold-out instant-read meat thermometer with a thermocouple sensor, a 4-inch probe and large red LED digits.
  • Same core specs, faster sensor: the original TP18 listed a 2–3 second read; today’s TP18S and TP18SW list 0.5 seconds. All three list a 14–572°F range and ±0.9°F accuracy.
  • Current models add a calibration function, a backlight and motion-sensing wake and sleep, according to TempPro.
  • Not waterproof: TempPro lists waterproofing as “N” for the TP18S and TP18SW, so wipe it clean rather than rinsing it under the tap.
  • A good pick if you want a fast, accurate instant-read thermometer for grilling and roasting without paying premium-brand prices.

The ThermoPro TP18 was one of the first budget instant-read thermometers to use a thermocouple sensor, the same fast-reacting type used in pricier professional models. Its successors keep the design: a probe that folds out from the body, bold LED digits and a hold button. Here’s what the original offered and what the current TP18S and TP18SW list today.

TP18 vs TP18S and TP18SW at a glance

Specification Original TP18 (archived listing) TP18S / TP18SW (current)
Sensor Thermocouple Thermocouple
Read time 2–3 seconds 0.5 seconds
Temperature range 14°F to 572°F (−10°C to 300°C) 14°F to 572°F (−10°C to 300°C)
Accuracy ±0.9°F (±0.5°C) ±0.9°F (±0.5°C)
Probe 4.0″ food-grade stainless steel, foldaway 4.0″ (103 mm) 304 stainless steel, foldaway
Display Large red digits LED, 1.63 × 0.75 in, backlit
Hold/lock Yes Yes
Calibration Not listed Yes
On/off Auto-off after 90 seconds Opens to turn on, closes to turn off; picks up to wake; sleeps after 90 seconds
Auto-rotating display Not listed No
Waterproof Not listed No
Battery Not listed on the archived page 2 × AAA

Original TP18 figures are from ThermoPro’s product page as archived in July 2019. TP18S and TP18SW figures are from TempPro’s current product pages, which list the same specifications for both. TempPro’s TP18SW listing title highlights its foldable probe.

Speed and accuracy

Thermocouple sensors react faster than the thermistors used in many budget thermometers, which is why the TP18 family reads so quickly. The original listed 2–3 seconds, and TempPro now lists 0.5 seconds for the TP18S and TP18SW. Fast readings matter when you’re checking steaks over a hot grill or reaching into an oven, because the lid or door stays open for less time.

All versions list ±0.9°F (±0.5°C) accuracy across 14–572°F. That’s tight enough for steaks, where a few degrees separate medium-rare from medium, and the range covers deep-frying oil and candy work too. The current models also have a calibration function, so you can correct the reading after an ice-water check. See how to calibrate a thermometer.

Design and everyday use

The probe folds into the body, protecting the tip and making the thermometer easy to store in a drawer or apron pocket. On the current versions, opening the probe turns the thermometer on and closing it turns it off. TempPro also lists motion sensing: pick it up to wake it, and it sleeps after 90 seconds of inactivity. The hold function freezes the reading so you can pull the probe out and read it away from the heat.

The display doesn’t auto-rotate, unlike some pricier models (TempPro’s own TP19 lists an auto-rotating display), so left-handed users may find themselves reading it upside down at times.

Pros

  • Fast thermocouple sensor (0.5 s listed on current models)
  • ±0.9°F listed accuracy
  • Wide 14–572°F range
  • Foldaway probe with auto on/off
  • Backlit display and calibration on current models

Cons

  • Not waterproof
  • No auto-rotating display
  • Original TP18 is discontinued; buy the TP18S or TP18SW new

Check Price on Amazon

How to use an instant-read thermometer

  • Insert into the thickest part of the food, away from bone, fat and gristle.
  • For thin cuts, insert from the side so the tip sits in the center.
  • Cook to safe minimums: 145°F for whole cuts of beef, pork, lamb and veal (plus a 3-minute rest), 160°F for ground meats, and 165°F for all poultry. See our safe cooking temperature chart.
  • Clean the probe between foods with a damp cloth or wipe, keeping water away from the body.

Bottom line

The TP18 helped make fast thermocouple thermometers affordable, and its successors keep the formula while cutting the listed read time to 0.5 seconds and adding a backlight, calibration and motion sensing. If you want quick, accurate spot checks and don’t need waterproofing, the TP18S or TP18SW is a sensible buy. For more options, see our meat thermometer round-up and how to choose a meat thermometer.

FAQ

Is the ThermoPro TP18 still sold?

The original TP18 was already out of stock on ThermoPro’s site in 2019. TempPro now sells the TP18S and TP18SW, which keep the same range and accuracy with a faster listed read time.

How fast is the ThermoPro TP18?

The original listed 2–3 seconds. The current TP18S and TP18SW list 0.5 seconds.

Is the TP18 waterproof?

No. TempPro lists the TP18S and TP18SW as not waterproof.

Can you calibrate the TP18?

TempPro lists a calibration function on the TP18S and TP18SW. A calibration function wasn’t listed for the original TP18.

What batteries does it use?

The TP18S and TP18SW use two AAA batteries, according to TempPro.

Sources: ThermoPro TP18 product page (archived July 2019); TempPro product pages: TP18S and TP18SW. Food-safety temperatures: FoodSafety.gov. Checked November 2026.